Pleasant Hearth LWS-130291 Guide d'installation

60-10-001W arming Y our Home. Warming Your Heart.8280 Austin AvenueMorton Grove, IL 60053877-447-4768Questions, problems, missing par

9Solid Pack Chimney with Metal Supports as a Thimble (Cont’d)Chimney Height / Rise and RunThis product was designed for and tested on a 6 inch (152mm)

10Chimney Termination RequirementsFollow manufacturer’s instructions for clearance, securing flashing and terminating the chimney. • Must have an appr

1142653WARNING! Risk of FireCLOSE OPENClose and securely latch the door after the fire has started, and after refueling, to prevent:• Spillage of smok

12Do not use a grate or elevate fire. Build wood fire directly on hearth. When the stove is used for the first time the solvents in the paint will s

13 The following use and safety tips should be observed:1. Inspect the glass regularly for cracks and breaks. If you detect a crack or break, exti

14NOTE: Coals may still be hot even though stove feels cool to the touch.1. Make sure stove is completely cool.2. Open glass door and lift up the fire

15 g) Once the kindling has started to burn, start by adding some of your smaller pieces of seasoned (dry) firewood. NOTE: Adding large pieces a

16 Environmental Conditions High trees, low lying house location such as in a valley, tall buildings or structures surrounding your house and

17 CAUTION! Allow the appliance to completely cool down before performing any cleaning or maintenance.Start the rst inspection after the rs

18 Item No. Description Qty. Part No. 1. Door Assembly 1 75-21-503 2. & 3. Glass (13.00”W x 8.38”H) and Gasket 1 75-21-514 3. 1/8” G

1CAUTIONAfter reading these instructions, if you have any doubt about your ability to complete your installation in a pro-fessional like manner you sh

19GHP Group warrants that your new woodburning stove or masonry wood insert is free from manufacturing and material defects for a period of five years

2Pedestal Base and Leg InstallationBefore Installing Stove, Follow These Steps for Pedestal Base and leg Installation. Model: HWS-230292 Large Wood St

3INSTALLATION1. Remove all parts from inside the stove body.2. Select the proper location for the stove. These appliances must not be installed a

4INSTALLATION ON A CONCRETE FLOORAn appliance installed on a concrete floor does not require floor protection. If carpeting or any other com-bustible

5INSPECT APPLIANCE & COMPONENTS AND PRE-USE CHECK LIST 1. Place the appliance in a location near the final installation area and

6Typical Stove SystemsStove system with masonry chimney consists of: • Stove • Chimney Connector (stove pipe) • Thimble • Masonry Chimney • Hearth Pad

7CHIMNEY SYSTEMSPrefabricated Metal Chimney• Must be a 6 inch (152mm) diameter (ID) high tempera-ture chimney listed to UL 103HT (2100°F) or ULC S627.

8ThimbleSite constructed for masonry chimney installation:Components• A minimum length of 12 inches [05mm] (longer for thicker walls) of solid insula